Hi everyone! I would like to thank Jeff D for his excellent donation. It will keep tzg.com up and running for about 4 months! If you feel so inclined, please feel free to click on that donation link to help keep the lights on. Much appreciated!
Color Switching Generator
|
03-20-2013, 12:49 AM
Post: #1
|
|||
|
|||
Color Switching Generator
So I have this idea for a generator but no clue how to go about doing it. I would like the actual case for it to be a clear/foggy casing with 2 or 1 small light bulb inside with the ability to switch between yellow and red. I can imagine this shouldn't be too difficult except for the keeping it to scale part.
As you might be able to tell I like to challenge myself with new ideas... Anyone have any ideas or recommendations? I've never done any type of electrical or anything of this sort before, but I'm guessing that it would take a small battery with a tiny switch to go from colors to on/off and the light bulb I could most likely get from a hobby store for trains. That's the important part. Making it look like a generator wouldn't be that hard. |
|||
03-20-2013, 02:19 AM
(This post was last modified: 03-20-2013 02:27 AM by mqstout.)
Post: #2
|
|||
|
|||
RE: Color Switching Generator
A simple three way switch (off, color1, color2) wouldn't be difficult... And for lights the wiring's simple...
https://www.youtube.com/watch?v=9DgAKhC4GoY Here's for a simple binary switch. Basics. http://www.specialpatrolgroup.co.uk/spoo...g/3way.jpg Here's a wiring diagram for a three position switch (NOT a "three way" switch...). The only difficult part will be (a) making sure your battery/switch/LED will all work together with the right power levels and (b) making it fit. Not that it will be dangerous or anything... Just could lose a lot of current to waste. Really, just experiment with it. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)