zombie67 Wrote:

Canadian Pittbull Wrote:Actually a bit of mixed media and they are all scratch built. Some of the smaller buildings are made of balsa wood where as some of the larger buildings are made with cardboard so I can get more of a feeling of height and that there are more floors in the building without having to build them. I use cardboard for the bases and then for those buildings that have steps or stairs I will raise those buildings up on a 1/2 inch base to give the look of a exposed foundation.

I made the full board instead of L shapes with a centre since it allows for the original boards to be drawn a random and then just place the buildings needed on the larger scale version. The board is 4ft x 4ft. centre of town is 8" x 8" squares and the L shaped boards have 4" x 4" squares. So it works out well and as far as the Mansion square is will be built as a separate terrain piece with 4" x 4" squares. and the Mansion built onto that piece.

Once all the buildings are done I will go back and fill them in with all the bits found in the original game boards artwork. I figured as long as the buildings were done we could still play on the scale board and I could work away at the the small bits later.

I will get some pics up soon just to show you some progress in what I am doing. Give you all some idears if you feel inspired to take on the daunting task yourself.

Good luck with it all CP!

I think a few work in progress shot would be could and you could update them until we get the finished article!

You are now making me think could I do something similar, with a large off-cut of wood I have got...hmmm, may get back on this one!

Canadian Pittbull Wrote:Well If you want something lighter I took two pieces of Styrofoam, the kind that is use for insulation in houses (comes in blue) SM brand that is 1.5" thick.

http://building.dow.com/styrofoam/na/res-canada/products/styrofoam/sm.htm

Not sure where you are but this stuff works like a charm cause you can sync two up together and then glue at the seam (I also used toothpicks with glue to help with the bond (essentially Pinning it). I am thinking of mounting the board at a later date on either some heavy duty cardboard or I might go with a piece of ply. Just trying to keep it light. Also with the Styrofoam you can mark it all out and then make grooves where the lines are then base it in white acrylic primer and then dry brushed with green your lines will come up and thus showing your squares then just go square by square and add glue and flock. I also added some rough spots with wall mud so I could create the muddy spots found on the original board art. make sure to paint that all in first before adding the flock.

zombie67 Wrote:

Canadian Pittbull Wrote:Well If you want something lighter I took two pieces of Styrofoam, the kind that is use for insulation in houses (comes in blue) SM brand that is 1.5" thick.

http://building.dow.com/styrofoam/na/res-canada/products/styrofoam/sm.htm

Not sure where you are but this stuff works like a charm cause you can sync two up together and then glue at the seam (I also used toothpicks with glue to help with the bond (essentially Pinning it). I am thinking of mounting the board at a later date on either some heavy duty cardboard or I might go with a piece of ply. Just trying to keep it light. Also with the Styrofoam you can mark it all out and then make grooves where the lines are then base it in white acrylic primer and then dry brushed with green your lines will come up and thus showing your squares then just go square by square and add glue and flock. I also added some rough spots with wall mud so I could create the muddy spots found on the original board art. make sure to paint that all in first before adding the flock.

Thanks for the tips.

I am in the South West of England, in sunny (well it's actually night at the mo) Devon. I am sure I can get Styrofoam of some kind.

May have to give this serious consideration.

Again good luck with yours.

zombie67 Wrote:

Canadian Pittbull Wrote:Actually a bit of mixed media and they are all scratch built. Some of the smaller buildings are made of balsa wood where as some of the larger buildings are made with cardboard so I can get more of a feeling of height and that there are more floors in the building without having to build them. I use cardboard for the bases and then for those buildings that have steps or stairs I will raise those buildings up on a 1/2 inch base to give the look of a exposed foundation.

I made the full board instead of L shapes with a centre since it allows for the original boards to be drawn a random and then just place the buildings needed on the larger scale version. The board is 4ft x 4ft. centre of town is 8" x 8" squares and the L shaped boards have 4" x 4" squares. So it works out well and as far as the Mansion square is will be built as a separate terrain piece with 4" x 4" squares. and the Mansion built onto that piece.

Once all the buildings are done I will go back and fill them in with all the bits found in the original game boards artwork. I figured as long as the buildings were done we could still play on the scale board and I could work away at the the small bits later.

I will get some pics up soon just to show you some progress in what I am doing. Give you all some idears if you feel inspired to take on the daunting task yourself.

Good luck with it all CP!

I think a few work in progress shot would be could and you could update them until we get the finished article!

You are now making me think could I do something similar, with a large off-cut of wood I have got...hmmm, may get back on this one!

energizercoony Wrote:

zombie67 Wrote:

Canadian Pittbull Wrote:Actually a bit of mixed media and they are all scratch built. Some of the smaller buildings are made of balsa wood where as some of the larger buildings are made with cardboard so I can get more of a feeling of height and that there are more floors in the building without having to build them. I use cardboard for the bases and then for those buildings that have steps or stairs I will raise those buildings up on a 1/2 inch base to give the look of a exposed foundation.

I made the full board instead of L shapes with a centre since it allows for the original boards to be drawn a random and then just place the buildings needed on the larger scale version. The board is 4ft x 4ft. centre of town is 8" x 8" squares and the L shaped boards have 4" x 4" squares. So it works out well and as far as the Mansion square is will be built as a separate terrain piece with 4" x 4" squares. and the Mansion built onto that piece.

Once all the buildings are done I will go back and fill them in with all the bits found in the original game boards artwork. I figured as long as the buildings were done we could still play on the scale board and I could work away at the the small bits later.

I will get some pics up soon just to show you some progress in what I am doing. Give you all some idears if you feel inspired to take on the daunting task yourself.

Good luck with it all CP!

I think a few work in progress shot would be could and you could update them until we get the finished article!

You are now making me think could I do something similar, with a large off-cut of wood I have got...hmmm, may get back on this one!

I also like to use foam core material for my buildings. Nice papery oustides with a faom center. Easy to cut, sculpt and STURDY. I use it to make my Warhammer terrain. Cheap at any hardware or specialty store.

mqstout Wrote:I wonder if it's the terrain tiles only, or all of them -- because I find it more problematic that the backs of the hero cards expansion/non-expansion are different.