A guide to Pinning

[willco]

Excellent! Good on you mate.

Sometimes I will score the *flat* parts that butt up against each other, so that the glue has more purchase. Seems to work well.

Also, after drilling the pin hole in one side, I usually put a small piece of blu tac on the figure, and then press the pieces together. When they come back apart, the blu tac has formed itself into a little nubbin that can be used to help determine the angle and spot of the second pin hole...this, I found, was my biggest issue with pinning (not lining the pin holes up correctly). It seems to have worked a trick. I mention it because someone out there might be as awful at this stuff as I am!


Cheers on another top shelf tutorial, sir.